How to make and clean acrylic boxes

We are all attracted to the appearance of acrylic display racks, so we all prefer them. Although there are numerous advantages to using acrylic display racks, there are several issues that must be addressed, such as how to prevent acrylic display rack deformation during the use process how to solve the problem, and so on. The following will help to popularize how to avoid acrylic display rack deformation and dirty solutions. Click here for Acrylic Display Stand.

Methods for preventing acrylic display rack deformation:

1. Select flexible rubber gaskets for the display shelf to add the necessary buffer between the acrylic material.

2. When making a large load-bearing area of the display, pay attention to the corresponding increase in plate thickness, to avoid deformation due to large load-bearing.

3. In the installation of a fixed acrylic display, pay attention to reserving a certain amount of contraction and expansion gap, to prevent thermal expansion and contraction of the impact on the display.

4. Design should be based on the type of products on display to choose the right weight of the acrylic sheet, not too thin or thick, to avoid deformation due to the plate load-bearing and product inconsistency.

Acrylic display rack cleaning methods:

1. For acrylic display shelf surface traces and oil stains, you can use a cloth or cotton drops on a little white wine, and gently wipe it, it will be bright and shiny;

2. Scrub the acrylic display rack with residual tea, good decontamination effect;

3. Put some indigo in the water, which will increase the gloss of the acrylic display shelf;

4. Gold-plated acrylic display rack if there is dirt, available towel dipped in beer or white wine wipe, can remove dirt;

5. The acrylic display rack surface if stained with paint or dirt, with vinegar is easy to wipe clean;

6. With onion sign rub acrylic display, not only can remove dirt, and especially bright;

7. With a soft cloth or soft paper, in the addition of alcohol or white wine in the water after wetting the acrylic products first wipe again with a clean cloth wipe again is very clean;

8. scrub acrylic products, first coated with chalk ash water or plaster powder water, dry, and then wipe with a dry cloth, both are easy to wipe away dirt, but also easy to polish;

9. First wipe off the dust with a damp cloth, and then rub the waste newspaper into a ball in the acrylic display, newspaper ink can quickly wipe the acrylic display;

10. acrylic display with a large area of oil stains, first use waste gasoline scrubbing, and then washing powder or decontamination powder scrubbing, and then rinse with a water can;

11. Basin loaded with some water, pour a little shampoo mix, and use it to wipe the acrylic display, it will look extra clean and bright;

12. Winter acrylic products' surface is easy to frost, can use a cloth dipped in thick salt water or white wine to wipe, the effect is very good;

13. Acrylic display rack surface accumulation of dirt, wipe with a cloth or back to the silk enzyme toothpaste, can be wiped clean and bright.

Acrylic box production process

1. Prepare materials and tools: You will need an acrylic board, acrylic glue, a protractor, a steel ruler, an ink pen, a saw, a sander, and other tools and equipment.

2. Measuring and marking: Using a steel ruler and protractor, measure and mark the acrylic sheet according to the desired size and shape. Using an ink pen or similar tool, draw the required cutting and bending lines on the acrylic sheet.

3. Cutting the acrylic sheet: Using a suitable saw tool, carefully cut the acrylic sheet along the marked cutting lines. Ensure that the saw blade is sharp and use the appropriate speed and pressure for cutting to avoid rupture or cracks in the acrylic sheet.

4. Bending acrylic sheet: If you need to bend the corners of the box, you can use a heater or heat gun to heat the bending line of the acrylic sheet. Be careful when heating to ensure that the acrylic sheet is heated evenly. Then, quickly bend the acrylic sheet to the desired angle and hold the angle until the acrylic sheet cools and retains its shape.

5. Apply an appropriate amount of acrylic glue to the acrylic sheet's edges, then align the edges of the acrylic sheet and apply an appropriate amount of pressure to bond them together. Check that the glue is distributed evenly and that the edges are properly aligned. Hold the acrylic panels together with clips or tape while the glue dries completely.

6. Sanding and Finishing: Using a sander or sandpaper, sand and finish the acrylic box's edges to make them smooth and clean. Avoid over-sanding or damaging the acrylic panel.

7. Finally, wipe down the acrylic box with a cleaning cloth to remove any dust, dirt, or fingerprints. Check that the box is completely glued and that it is the correct shape and size.